MP3356 high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 1 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. the future of analog ic technology description the MP3356 is a fast, highly efficient and precision high voltage photo-flash charger for dsc xenon flash. the MP3356 has a peak current of 1.5a. a 50v, 0.5 ? internal power switch lowers transformer turns ratio and switching losses associated with the primary leakage inductance and winding capacitance. integrated secondary feedback resistors provide +/-2.5% output voltage charge accuracy. MP3356 also has an integrated igbt driver. MP3356 is available in the 10-pin, 2x2 flip chip package. features ? integrated 50v, 0.5 ? power switch ? 1.5a peak current limit ? 2.5% charge accuracy ? <1ua shutdown current ? integrated igbt driver applications ? digital still cameras ? optical film cameras ?mps? and ?the future of analog ic technology? are registered trademarks of monolithic power systems, inc. typical application 4 1, 2, 3 5, 6, 7, 8 MP3356 vin vin vin agnd en pg igbtin igbtin pgnd igbtout fb sw u1 gnd chag pg
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 2 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. ordering information part number* package top marking free air temperature (t a ) MP3356dg 10-pin, 2x2 flip qfn 4py ?40 c to +85 c * for tape & reel, add suffix ?z (e.g. MP3356dg?z). for rohs compliant packaging, add suffix ?lf (e.g. MP3356dg?lf?z) package reference top view igbtin igbtout sw pg 1 2 3 4 vin agnd pgnd en 9 8 7 6 vin fb 5 10 absolute maxi mum ratings (1) v in to agnd.......................................-0.3vto 6v en, igbtin, igbtout, pg to agnd-0.3vto 6v fb to agnd ...................................-60v to 350v sw to agnd...................................-0.3v to 50v pgnd to agnd ????????-0.3v to 0.3v storage temperature............... -55 c to +150 c continuous power dissipation (t a = +25c) (2) ????????????????..?....1.6w junction temperature ............................ +150 c lead temperature (solder).....................+260 c recommended operating conditions (3) supply voltage v in .............................2.8v to 6v operating junct. temp (t j )..... ?40 c to +125 c thermal resistance (4) ja jc 2x2 flip chip ...........................80 ...... 16 ... c/w notes: 1) exceeding these ratings may damage the device. 2) the maximum allowable power dissipation is a function of the maximum junction temperature t j (max), the junction-to- ambient thermal resistance ja , and the ambient temperature t a . the maximum allowable continuous power dissipation at any ambient temperature is calculated by p d (max) = (t j (max)-t a )/ ja . exceeding the maximum allowable powe r dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. internal thermal shutdown circuitry protects the device from permanent damage. 3) the device is not guaranteed to function outside of its operating conditions. 4) measured on jesd51-7, 4-layer pcb.
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 3 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. electrical characteristics v in = v en = 3.6v, t a = +25 c, unless otherwise noted. parameter conditions min typ max unit photoflash capacitor charger v in voltage range 2.8 6 v v in uvlo rising edge, hysteresis = 200mv typical 2.5 v v in quiescent current v(en)=high, v(fb) = 0 1 2 ma v in quiescent current v(en)=high, v(fb) = 336v 100 a shutdown current from v in v(en)=low, v in =3.6v 1 a v sw leakage current v in =3.6v, v sw =50v, in shutdown 1 a sw on resistance between sw and pgnd switch turn-on, i sw =100ma ,v in =3.6v 0.5 ? en input high voltage 2.4 v en input low voltage 0.6 v pull-down resistance of en pin v(en)=3.6v 100 k ? i peak peak current limit 1.2 1.5 1.7 a charge completion detect voltage at fb 294 302 310 v fb resistance v(fb)=30v 315 k ? dcm comparator threshold 5 v pg leakage current v(pg)=3.6v 1 a pg output low voltage i sink = 2ma 0.1 v max t on maximum t on time 70 s thermal shutdown rising edge, hysteresis = 15 o c 150 o c igbt driver igbtout pull-up on resistance 6 ? igbtout pull-down on resistance 6 ? igbtin input high voltage 2.4 v igbtin input low voltage 0.6 v propagation delay igbtin rising/falling edge to igbtout rising/falling edge, cgate=6800pf 40 ns igbtout rise time cgate=6800pf 130 ns igbtout fall time cgate=6800pf 180 ns pull down resistance of igbtin 90 k ?
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 4 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. pin functions pin # name description 1 igbtin logic input pin for igbt drive. 2 igbtout output drive for igbt gate. conn ect this pin to the gate of the igbt. 3 sw switch pin. this is the drai n of the internal power switch. 4 pg open-drain power-ready output. pg becomes low when the output voltage is reached. 5 fb feedback pin. its trip voltage is 300v 6 en charge enable pin. a low to high transition on this pin puts the part into power delivery mode. once the target voltage is reached, the part will stop charging the output. toggle this pin will start charging again. bring th is pin low will terminate the power delivery and put the part in shutdown. 7 pgnd power ground 8 agnd analog ground. tie it directly to local ground plane. 9,10 vin input supply pin. connect it to system su pply voltage. bypass vin to agnd with a 0.1uf or greater ceramic capacitor.
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 5 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. typical performanc e characteristics t a = +25 c, unless otherwise noted. input voltage (v) input voltage (v) output voltage (v) input voltage (v) output voltage vs. input voltage charge time vs. input voltage 600 900 1200 1500 1800 2100 2400 2700 3000 3300 3600 3900 2.5 3 3.5 4 4.5 5 5.5 6 6.5 charge time (ms) iset=1.5a, cout=47uf, vo=300v iset=1.5a, cout=100uf, vo=300v efficiency vin=3v, iset=1.5a with 1:8 transformer line regulation 40 45 50 55 60 65 70 75 80 85 70 110 150 190 230 270 310 efficiency (%) vin=3v, lpri=9.8uh vin=4.5v, lpri=9.8uh vin=6v, lpri=9.8uh 0.993 0.994 0.995 0.996 0.997 0.998 0.999 1 1.001 2.5 3 3.5 4 4.5 5 5.5 6 6.5 normalized output voltage(v) iset=1.5a, cout=47uf, vo=300v 293.1 293.4 293.7 294 294.3 294.6 294.9 295.2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 output voltage(v) iset=1.5a, cout=47uf, vo=300v
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 6 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. typical performanc e characteristics (continued) t a = +25 c, unless otherwise noted.
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 7 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. block diagram + - s rq q delay 300ns 27mv + - s r q q one shot + - vilim igbtout fb igbtin vin en sw pg 1.2v figure 1?functional block diagram
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 8 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. operation the MP3356 controlled flyback charger operates in critical conduction mode with 1.5a peak current. the output voltage is divided down through an internal 300: 1 resistive divider from the positive terminal of the transformer secondary (fb pin) and compares it with an internal 1.2v reference. the low to high transition of the en pin will enable the flyback converter to switch. a constant t off of 20 s is used when the output voltage is below 20v to avoid inrush current. the boundary mode operation will follow to minimize charge time when the output voltage is above 20v. a minimum t off of 200ns serves as blanking for turn off transition. the circuit will stop switching and pg will be pulled low once the flash capacitor is charged to 300v. this value is set by the internal 300:1 r divider and the 1.2v reference. when charge is complete, the part will shut down its internal circuitry and draw less than 100ua drawn from vin. the en pin will restart the charge. bringing the en pin low terminates the power delivery and puts the part in shutdown. a maximum t on timer prevents pulling current from a depleted battery. if the on time exceeds the maximum t on , the switch is forced off regardless of i peak detection.
MP3356 ? high voltage photo flash charger and igbt driver for dsc MP3356 rev. 0.91 www.monolithicpower.com 9 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. application information charge speed the output capacitor charging speed is determined by: lim ch arg e in out i t n v v + primary inductance the primary inductance is calculated based on the minimum off time period: out min,off primary peak vt i ni v out : output voltage about 300v t min-off minimum off time 200ns. i peak : primary peak current turns ratio the minimum turns ratio of the flyback transformer is obtained as: out ds in v n vv ? v ds : fet drain-source voltage v in : input voltage 3~5v output diode selection the reverse voltage of the output diode is determined by: dout in vv nv = +
MP3356 ? high voltage photo flash charger and igbt driver for dsc notice: the information in this document is subject to change wi thout notice. users should warra nt and guarantee that third party intellectual property rights are not infringed upon w hen integrating mps products into any application. mps will not assume any legal responsibility for any said applications. MP3356 rev. 0.91 www.monolithicpower.com 10 1/29/2010 mps proprietary information. unaut horized photocopy and duplication prohibited. ? 2010 mps. all rights reserved. package information qfn 10 (2mm2mm)
|
